The Ford Falcon is an iconic car that has been around for many years. As your Au Falcon ages, you may need to replace the Au Falcon Alternator to get the right current to feed into battery. Ford alternators are known for their excellent performance and high quality, but they can still fail when you least expect it. If your car’s alternator is old or has been damaged through rough driving or bad weather conditions, then it may be time to replace it with a new one.
The following process will show you how:
DIY Au Falcon Alternator Replacement
When you’re ready to replace your old car alternator, the first step is to disconnect the battery. Next, remove the fan belt and unbolt the alternator from its mounting point. Remove any hoses connected to it and remove your old alternator, noting where it may be attached to other parts of your vehicle.
The new replacement part should come with a wiring connection for plugging into an electrical connector on top of your engine block. There are two types – two pin (for example an AU Falcon) or three pin (for example an E Series).
The procedure differs slightly depending on which type you have but essentially involves removing this electrical connector from its mounting bracket so that you can slide it onto one end of your new Ford Falcon Alternator Wiring Harness kit which consists of a male plug at one end and female socket at another end. To connect these two together follow these steps:
Remove the fan belt of Au Falcon Alternator if you haven’t already done so. This will make removal of the alternator easier and safer.
- Remove the fan belt of Au Falcon Alternator if you haven’t already done so. This will make removal of the alternator easier and safer.
Unbolt the alternator from its mounting point.
- Unbolt the alternator from its mounting point on your Ford Falcon engine block.
- Make sure you don’t forget to unplug the electrical connector or connectors to your Ford Falcon alternator before you remove it from its mounting point on your engine block! You can do this by using a 10mm socket and ratchet, but if you’re not comfortable doing this yourself, take it to someone who is qualified and experienced with wiring harnesses in vehicles like yours.
- Don’t forget to remove the fan belt of Au Falcon Alternator if you haven’t already done so! You can do this by using a 10mm socket and ratchet (aka Allen wrench or hex wrench), but if you’re not comfortable doing this yourself, take it to someone who is qualified and experienced with removing belts from engines like yours
Unplug the electrical connector or connectors to your Ford Falcon alternator.
If you’re replacing your Ford Falcon alternator with a brand new one, then the first thing you need to do is remove the electrical connector from your old alternator. This can be done with a flathead screwdriver, but it’s much easier if you have an appropriate size wrench for this job. If you don’t have one, try using a pair of pliers instead.
Once the connector has been removed from your old Ford Falcon alternator and placed on the new one (which we’ll go over later), then connect it back up by pushing down on both ends until they click together. Make sure not to damage either of them while doing so because they may not work properly after being damaged while removing/installing!
Remove your old alternator, noting where it may be attached to other parts of your vehicle, including wiring harnesses and pipes, and remove them as well.
Unbolt the alternator from its mounting point.
Carefully remove the alternator wiring harness so that you can access all of its connections without having to unplug anything.
Disconnect all electrical connectors on the back of your new replacement 2 pin and 3 pin Au Falcon alternator as well as test leads if you have one fitted with a visual diagnostic tool (VDT).
Install your new alternator in reverse order to your removal process above, paying close attention to those other components that you removed when removing the original alternator.
- Re-install your new alternator in reverse order to your removal process above, paying close attention to those other components that you removed when removing the original alternator.
- Physically check around and behind where the alternator is located on your vehicle to ensure that all wires, hoses and tubes are properly reattached as well.
- Make sure to test drive the car after reassembly to make sure everything operates properly.
You can simply learn to replace your old Au Falcon Alternator
If you’re interested in learning how to replace your old Au Falcon Alternator, then congratulations! You’ve come to the right place. It’s an easy job that can be done by anyone who knows their way around a car and has some basic tools. You can save money by doing it yourself, and save time by doing it yourself as well. With the new alternator on board, your Au Falcon will be running like new again in no time!
Ho Alternator Work to Generate electricity for your Car’s Battery
An alternator is a small electrical generator that produces electricity for your car’s battery. It does this by using the engine’s power to run a series of electromagnets, which then generate electricity and send it on to your battery.
If you have a brand new 2pin and 3 pin Au Falcon Alternator in your car, there is no need for you to replace it unless you suffer from any of the following problems:
- Car not starting up when switched on
- Slow charging speed during running conditions (if left overnight)
If your car is a 2 pin alternator, then you’ll need to get the brand new 2 pin alternator. If it’s a 3 pin alternator, then you can either get a brand new one or replace the old one with a used one. In this case, if replacing with a used one, make sure that it has the same specs as the original (same voltage).
Buy Brand New Au Falcon Alternator from Parts Factory Australia
The Parts Factory Australia is the best place to buy Au Falcon Alternator. Here, you can get all kinds of Falcon Alternators at a very affordable price.
You will find both 2pin and 3pin Au Falcon Alternator here in this website. You can also buy Brand New 2pin and 3pin Au Falcon Alternator from here at very low price with quality assured products by Parts Factory Australia.
Conclusion
You can have your Ford Falcon alternator rebuilt, where the core is cleaned and rebuilt with new parts. This is a good option if you’re looking for a cost-effective way to repair your alternator. Alternators are typically not expensive to replace, so it’s often cheaper than having your local mechanic rebuild one for you. If you’re unsure about what type of alternator would be best for your vehicle, speak with an expert at Parts Factory Australia today!
This Article Was First Published On:
DIY Au Falcon Alternator Replacement
The post DIY Au Falcon Alternator Replacement appeared first on CME Blog Spot.
from CME Blog Spot https://ift.tt/M5ToNpm
via IFTTT
0 comments:
Post a Comment